Once the update process has begun, do not disturb the connections until it is complete. The update process will take about a minute. Press Start to begin, progress will be indicated in the window.zip file) and follow the on screen instructions. Locate the flash file (make sure you select the uncompressed hex file, not the.You can safely back out of the update process up to the point you initiate flashing the computer from your PC desktop. This indicates that the Cobalt and your PC are connected, and that you are ready to start the update process. A green “Connected” message should appear at the bottom of the Cobalt’s screen. With the USB adapter plugged into the Cobalt, press the SELECT button. Either drag the BOOTLOADER icon to the trash, or go to the menu bar on the left and look for Bootloader in the menu tree. After the file is copied, the copy window will disappear. You will see a copy window showing the file being copied. Drag and drop the “S19” file from your desktop into the Bootloader window.Double-click the BOOTLOADER icon to open the window.This indicates that your Mac has recognized your Cobalt 2 as a USB device. After a few moments, you will see the BOOTLOADER icon appear on your Mac desktop.If you do not see the time/ date screen, first disconnect the Cobalt from the adapter, then press both the “ENTER BUTTON” and the “BACK BUTTON” simultaneously for at least 11 seconds to manually reset. The screen on your Cobalt 2 will remain dark for a few moments while the update completes, then the screen will come on and show the time/date screen.Once the file transfer is complete, RIGHT Click on the “BOOTLOADER” icon (on the left of your Explorer Window) and click “Eject” to safely eject the Cobalt 2 Computer.Transfer the S19 File to the “BOOTLOADER” by Drag and Drop.Look for “BOOTLOADER” it should be drive “D” or the next available drive letter.If you have an older version of Windows, you may get the “ Auto Play ” popup.Explore your PC using Windows Explorer.You will hear your PC make the “device connected” sound.Once the screen on your Cobalt 2 goes black, release the buttons.On your Cobalt 2 Dive Computer, press both the “ENTER BUTTON” and the “BACK BUTTON” simultaneously for at least 11 seconds, until the screen on your Cobalt 2 goes dark.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |